info@waoomart.com

Free Delivery of Amazon Products to your doorstep in Pakistan! Products from any country like USA, UK, Australia, Canada deliver within 10-15 working days all over Pakistan.

Tel:(042) 37396668-9

LOGO

TeQable Car Cup Holder Phone Mount - Adjustable Cupholder Cell Phone Holder for Smartphone iPhone 11 Pro/XR/Xs/XS Max/X/8/7Plus/Galaxy/Xperia/Samsung, Fits Phones 2.2” to 3.8” Wide

  • ASIN: B08CCRYTL4
  • WEIGHT: 13.1 Ounces
  • Quantity Left: 999

PKR Rs. 7,887.00 /-


Car Cup Phone Holder - Fits Your Vehicle. Fits Your Device. Fits Your Life Big Enough Cup Holder Base to Fit All Cars This cup phone holder is suitable for your vehicle cup holders between Min 2.28in to Max 4.6in in diameter. It sits conveniently in your vehicle’s cup-holders, it’s also great for use in boats, RVs, golf carts and more. Expandable Grip-Tight Base Lock in your phone or tablet, securely, safely and without worry. Simply insert base, rotate to the snuggest fit, and voila! You’re ready to rock your next work trip, road trip or back country adventure. Your Ideal Viewing Height Simply loosen the height adjustment wheel, adjust the height to your optimal level, then retighten to achieve a strain free, enjoyable device viewing experience in seconds. It Fits! Every Device 3” to 6.5” Fit any devices from 2.2 to 3.8in wide, such as iPhone 11 Pro/XR/ XS/x/8/8 Plus/6 Plus, Samsung Galaxy S9/S8/S7/Note8/Note9, Huawei, HTC, LG, GPS, PSP etc. Ultra-Rigid Adjustable Height & Angle Arm Universal Adjustable Cup Holder Base Total 360* Optimal Viewing Rotation 100% Wobble, Shake & Shimmy Free

Specifications

Item Weight
13.1 ounces
ASIN
B08CCRYTL4
Item model number
CH01
Colour
Black
Manufacturer
TeQable
Date First Available
July 5, 2020

Car Cup Phone Holder - Fits Your Vehicle. Fits Your Device. Fits Your Life Big Enough Cup Holder Base to Fit All Cars This cup phone holder is suitable for your vehicle cup holders between Min 2.28in to Max 4.6in in diameter. It sits conveniently in your vehicle’s cup-holders, it’s also great for use in boats, RVs, golf carts and more. Expandable Grip-Tight Base Lock in your phone or tablet, securely, safely and without worry. Simply insert base, rotate to the snuggest fit, and voila! You’re ready to rock your next work trip, road trip or back country adventure. Your Ideal Viewing Height Simply loosen the height adjustment wheel, adjust the height to your optimal level, then retighten to achieve a strain free, enjoyable device viewing experience in seconds. It Fits! Every Device 3” to 6.5” Fit any devices from 2.2 to 3.8in wide, such as iPhone 11 Pro/XR/ XS/x/8/8 Plus/6 Plus, Samsung Galaxy S9/S8/S7/Note8/Note9, Huawei, HTC, LG, GPS, PSP etc. Ultra-Rigid Adjustable Height & Angle Arm Universal Adjustable Cup Holder Base Total 360* Optimal Viewing Rotation 100% Wobble, Shake & Shimmy Free

Veria
Rating:

Date:Reviewed in Canada on November 24, 2020

Review:I do need to see my phone when I drive mainly for navigation. Sometimes I am waiting in the car and read something on the phone or watch something. I used to have a phone mount that was attaching to my A/C valve. You can see it on the top right of the first picture. That was a pain! Probably not the products fault but how my A/C vent is placed. Since I bought this cup-holder phone stand, things have changed drastically. This thing gets well fastened inside the cup holder through some protruding pads that make it sit firm in there. The neck is a high quality and firm, yet shapeable material. You can easily bend or tilt it to put the phone in the ideal position for your convenience. The phone holder itself tilts and rotates easily around the tip of that neck. The material is also nice and high quality. In general, this was the best I could ask for and I’m using it in a daily basis. Read more

Kathi F
Rating:

Date:Reviewed in Canada on October 26, 2020

Review:With a twist of the notched ring directly above the base that sits in your cupholder, protrusions with a non-slip face extend from the diameter of the base to securely grip your cupholder even if your vehicle’s cupholder has the spring loaded protrusions to secure cups of varying sizes. The base is very secure in my cupholder. You adjust the height and angle you would like your phone with the black plastic finger/thumb screw you can see in my photos located at the top of the fixed shaft coming out of the base. In addition, there is a ring at the back of where the phone holder. With a turn of this ring, you loosen and tighten the ball joint to further fine tune the angle and orientation of your phone. I find it you wish, you can tighten this ring only snug tight so it will still remain in place but then you can still turn it to portrait/landscape mode or direct the screen towards your passenger Without loosening the ring while driving. If you wish, you can of course tighten the ring tighter but you will have to loosen the ring to change the angle or direction of the phone screen. To secure the phone in the holder, you squeeze the side tightly to grab the sides of the phone. There is a pop out claw at the bottom to support the bottom of the phone to prevent it from sliding down right out of the side grips when in portrait orientation. A raised button on the top (when in portrait orientation) back of the phone holder releases the side grips to release your phone. It took me 2 weeks before I realized you MUST hold down this button for about 3 seconds and the sides open to their widest position to release your phone. My only 2 complaints are: 1) The bottom claw is too short and doesn’t extend enough. The end of the claw only reaches about 1/2 the thickness of my iPhone 8 Plus which does have a thin silicone case covering the back and sides. Occasionally if the sides and not squeezed as tight as possible to the sides of the phone, the phone will slide down right out of the holder. The claw needs to be about 3mm or 1/8 of an inch longer to extend to at least the front edge of your phone. 2) In the fully widest position, the side grips are only slightly wider than the iPhone 8 Plus with a thin silicone case covering the sides. Barely enough to release the phone but it works. Your phone with or without a case cannot be wider than 9cm or 3-1/2” wide and at this width, it will be a bit difficult to insert and remove your phone from the side grips. As phones are getting larger, I would like to see this side grips of this holder about 1cm or 3/8” wider when fully extended keeping in mind you need it a bit wider than your phone so you can insert and remove your phone without difficulty. If your phone is not wider than the above measurement, I highly recommend this holder. Read more

TiffGreg88
Rating:

Date:Reviewed in Canada on November 11, 2020

Review:I like this car phone holder so much better then the ones I’ve used before! I’ve had one that sticks in the heater vent and it scratched it! Then I have also had the ones that go on the window. Which leaves a gross circle on the windshield. This I so much better! Easy to put in and out of the cup holder when it’s not needed! Read more

Robert Zhang
Rating:

Date:Reviewed in Canada on October 29, 2020

Review:Mounting phone on windshields or vents may be very uncomfortable for many drivers. This is another good option to hold phones. It is made of good quality materials and can be adjustable for many angels and sizes. Read more

lenb
Rating:

Date:Reviewed in Canada on September 30, 2020

Review:Very nice product, easily adjustable to the car's cupholder. Easy to secure the phone, and really nice release button. It will be very handy, especially when using Maps on trips. Thanks for a nice affordable product! Read more